کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6635242 | 461118 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modeling and measurement of thermo-physical properties for Athabasca bitumen and n-heptane mixtures
ترجمه فارسی عنوان
مدلسازی و اندازه گیری خواص حرارتی و فیزیکی برای قیرهای اتاباسکا و مخلوط های نپتون
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
The viscosity of bitumen is extremely high at low temperature (reservoir and atmospheric conditions). Therefore, the viscosity reduction is essential for bitumen production, pipeline transportation, and processing. The aim of this study is to investigate the effect of temperature, pressure, and solvent weight fraction on the physical properties of bitumen. The experiments were conducted using Athabasca bitumen sample and n-heptane at temperatures from 22 to 190 °C and at pressures up to 10 MPa for mixtures with different n-heptane fractions. The measured density and viscosity data were examined with available models in the literature. The mixture densities were well predicted with the assumption of no volume change on mixing. Increasing n-heptane concentration results in higher deviation of model from data up to 0.5 n-heptane weight fraction. The viscosity of the bitumen significantly reduced with temperature and n-heptane dilution. The effect of pressure on the viscosity was higher at either low n-heptane weight fractions or low temperature. The viscosity data were well represented by the power law and Cragoe's models using the volume fractions with 7.0% and 13.6% average absolute relative deviation (AARD), respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 157, 1 October 2015, Pages 73-81
Journal: Fuel - Volume 157, 1 October 2015, Pages 73-81
نویسندگان
Hossein Nourozieh, Mohammad Kariznovi, Jalal Abedi,