کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6640466 | 461158 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Synthesis of carbon nanofibers supported cobalt catalysts for Fischer-Tropsch process
ترجمه فارسی عنوان
سنتز نانوبلورهای کربنی کاتالیست های کبالت را برای فرایند فیشر تروپچ پشتیبانی می کند
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نانو فیبر کربن، کبالت، فیشر تروپس، غیر فعال کردن کاتالیست
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
چکیده انگلیسی
In this paper, CNFs prepared at three different temperatures (1023, 873 and 723Â K, called CNF-1, CNF-2 and CNF-3, respectively) were used as supports for cobalt-based catalysts in the Fischer-Tropsch Synthesis (FTS). The supports and cobalt catalysts were characterized by nitrogen adsorption-desorption, temperature-programmed reduction (TPR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) techniques; the metal content of the cobalt-based catalysts was analyzed by atomic absorption. The activity and selectivity of the CNFs supported catalysts were studied at 523Â K, 20Â bar and H2/COÂ =Â 2. Co/CNF-1 and Co/CNF-2 were very active and showed high selectivity to CH4 and CO2, without further deactivation, whereas the less active catalyst Co/CNF-3 led to the highest selectivity to long-chained hydrocarbons (C5+) and under was a remarkable deactivation. Used catalysts were characterized by nitrogen adsorption-desorption, XRD and TGA. Results confirmed that all the catalysts underwent catalyst fouling as a consequence of C5+ hydrocarbons formation whereas catalyst Co/CNF-3 presented a notably metal sintering by coalescence.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fuel - Volume 111, September 2013, Pages 422-429
Journal: Fuel - Volume 111, September 2013, Pages 422-429
نویسندگان
José Antonio DÃaz, Miriam MartÃnez-Fernández, Amaya Romero, José Luis Valverde,