کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
668122 1458732 2015 19 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
An accurate wall temperature measurement using infrared thermometry with enhanced two-phase flow visualization in a convective boiling system
ترجمه فارسی عنوان
اندازه گیری دما دقیق دیوار با استفاده از ترمومتر مادون قرمز با تجدید جریان دو فاز در یک سیستم جوش کنترلی
ترجمه چکیده
الگوریتم ردیابی دما دیوار بر روی طراحی دیوار گرم کننده پیشنهادی، هم برای حالت های حالت پایدار و هم برای گذار تأیید شد. همچنین چنین الگوریتمی برای اندازه گیری جریان شار قابل استفاده بود. در نهایت، امکان پذیری رویکرد حاضر با استفاده از یک آزمایش جوش داده شده جریان جوش شیرین نشان داده شد. نتایج نشان داد که هر دو حرکات هیدرودینامیکی حباب و دمای دیوار مربوطه می توانند با استفاده از استراتژی اندازه گیری، با استفاده از استراتژی اندازه گیری، که از آن ارتباط بین حباب های بخار کششی و انتقال حرارت دیوار مورد بحث قرار گرفته است، گرفته می شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The wall temperature tracking algorithm on the proposed heater wall design was validated both for steady-state and transient conditions. Also, such algorithm was proved to be applicable for the heat flux measurement. Finally, the feasibility of the present approach was demonstrated through a subcooled flow boiling experiment. The results showed that both the hydrodynamic motions of bubble and the corresponding wall temperature can be captured with high fidelity using the measurement strategy presented, from which the interrelation between the sliding vapor bubbles and the wall heat transfer were discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Thermal Sciences - Volume 90, April 2015, Pages 248-266
نویسندگان
, , ,