Experimental validation of a semi-dynamic simplified model of active pipe-embedded building envelope

• A semi-dynamic simplified model is for active pipe-embedded building envelope.
• Experimental facility is setup and presented for active pipe-embedded building envelope.
• Experimental results for active pipe-embedded building envelope are presented.
• Experiment validation of the semi-dynamic simplified model is presented.

Active pipe-embedded building envelope can allow for substantial heat flow for relatively small temperature difference due to the embedded pipes in the external wall/roof. This structure can directly utilize the low-grade sources for reducing building cooling/heating load and improving indoor thermal comfort by intercepting the heat gain/loss through the building envelope due to the circular water inside the embedded pipe. This paper presents the experimental validation of a semi-dynamic simplified model of the active pipe embedded building envelope. The experiment test rig consists of two environment chambers with one for simulating the ambient environment and one for indoor environment with a pipe-embedded building envelope sample separating both chambers. A small chiller and a buffer tank are installed to provide stable water temperature for the test sample. The temperatures and heat fluxes on both sides of the test sample, the inlet and outlet water temperature as well as flow rate are measured. The measured boundary conditions are used as the inputs of the semi-dynamic simplified model for calculating the thermal performance of the active structure. The results show the semi-dynamic simplified model can predict the semi-steady or pure dynamic thermal performance of the pipe-embedded building envelope very well by comparing with the measurement.