کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
669077 1458722 2016 18 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental and numerical investigation of the first heat-up of refractory concrete
ترجمه فارسی عنوان
بررسی تجربی و عددی اولین گرمایش بتن نسوز
کلمات کلیدی
خشک شدن نسوز، سنسور فشار پورت، بتن مقاوم در برابر، انتقال حرارت و جرم، رسانه های متخلخل، مدل، خشک کردن در دمای بالا،
ترجمه چکیده
اولین گرمایش کوره های متشکل از بتن مقاوم به مرطوب، یک چالش است به علت افزایش فشار مخزن که می تواند از مقاومت بتن بیشتر باشد. برای گسترش درک پدیده های انتقال گرما و جرم پیچیده که در طول اولین گرم شدن رخ می دهد، دو آزمایش تجدید پذیر گرمایی انجام می شود. این ها با استفاده از یک سنسور فشار منفی توسعه یافته انجام می شود. این آزمایش ها تغییر شدید هدایت حرارتی بتن در طول فرآیند را نشان می دهد. علاوه بر این، حتی در صورت گرم شدن یک طرفه، دو جبهه خشک شدن رخ می دهد. علاوه بر تحقیقات تجربی، اولین گرمایش، با استفاده از یک مدل فیزیکی، بر اساس توازن انرژی و توده های آب مایع، بخار آب و هوا، شبیه سازی می شود. با کمک شبیه سازی عددی، اولین گرمایش بیشتر مورد بررسی قرار می گیرد و جریان جریان جرمی هوا، بخار و مایع مورد بحث قرار می گیرد. در محدوده مطالعات حساسیتی، هدایت حرارتی بتن و نفوذپذیری آن به عنوان مهمترین خواص مواد به دست آمده است و برای کالیبراسیون مدل مورد استفاده قرار می گیرند که هدف از نمایش داده های تجربی آن است. خواص دارویی تنظیم شده در توافق خوب با خواص بتنی مقاوم است که در ادبیات گزارش شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The first heat-up of furnaces consisting of wet refractory concrete is a challenge due to the pore pressure build-up which can exceed the strength of the concrete. To extend understanding of the complex heat and mass transfer phenomena taking place during the first heat-up, two reproducible heat-up experiments are carried out. These are performed by using a new developed pore pressure sensor. The experiments exhibit an intense change of concrete's thermal conductivity during the process. Further, even in case of one sided heating, two drying fronts are found to occur. In addition to the experimental investigation the first heat-up is simulated using a physical model, based on the coupled balances of energy and the masses of liquid water, water vapour and air as well. By the aid of numerical simulation the first heat-up is further investigated and mass flow behaviour of air, vapour and liquid water is discussed. Within the scope of a sensitivity study the concrete's thermal conductivity and it's permeability are obtained as it's most important material properties and they are used for calibration of the model aiming well representation of the experimental data. The adjusted material properties are found to be in good agreement with refractory concrete properties reported in literature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Thermal Sciences - Volume 100, February 2016, Pages 108-125
نویسندگان
, , , ,