Modelling of heat transfer between two rollers in dry friction

An analysis of heat transfer between two rollers in dry friction is presented in this paper. The contact is peripheral and is assumed to be imperfect. The heat transfer at the interface is modelled by a thermal contact resistance. The heat flux is generated by dry friction at the interface. The two rollers are cooled by convection. A numerical model has been developed to determine the steady state temperature in rollers. Taking into account the transport phenomenon due to motion, the mesh is correlated with the velocity. The accuracy of the mesh is validated by comparison with an available analytical solution developed for a single roller in rotation. The thermal behaviour is analysed with respect to: (i) the velocity, (ii) the heat convection coefficient, and (iii) the thermal contact resistance. The evolutions of the temperature and the partition coefficient of frictional heat are presented and discussed.