Pre-packed alkali activated cement-free mortars for repair of existing masonry buildings and concrete structures

This paper is aimed to study a ground granulated blast furnace slag activated with alkali powder to manufacture Portland-free mortars for conservation, restoration and retrofitting of existing masonry buildings and concrete structures. Activator/precursor represents the key parameter - not only for elasto-mechanical performances - influencing the rheological properties and the shrinkage: the higher the activator dosage, the higher the consistency class and shrinkage. Moreover, elastic modulus of slag-based mortars is lower than that of OPC-mortars at the same strength class. AAMs seem to be more promising for a sustainable future in construction since the GER and GWP are reduced by about 80% compared with traditional Portland cement mortars with the same compressive strength.