کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6724327 503607 2014 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Shear performance of prestressed ultra high strength concrete encased steel beams
ترجمه فارسی عنوان
عملکرد برشی از پرتوهای فولادی پر شده از بتن پر استرس
کلمات کلیدی
پرتو، نسبت عمق برشی، درجه ابتدایی، انعطاف پذیری برشی،
ترجمه چکیده
با توجه به خواص مقاومت فشاری و دوام بتن فوق باریک بالا، بتن پیش ساخته بتن فوق العاده با مقاومت بالا در مهندسی پل به طور گسترده ای مورد استفاده قرار گرفت، اما رفتار شکننده ای را به همراه داشت. فولاد سازه ای در داخل آن، راه خوبی برای رفع مشکل شکنندگی بود. هدف از این تحقیق، بررسی عملکرد برشی از پرتوهای فولادی کوچک با مقاومت بالای پیش بندی است. در مجموع 15 پرتوهای فولادی پر از بتن پرقدرت پرشده و هفت پرتو بتنی با مقاومت بالا در برابر مقاومت برشی تحت شرایط بارگذاری ساده سه نقطه مورد آزمایش قرار گرفتند. متغیرهای اصلی این تحقیق شامل وجود فولاد سازه ای، نسبت عمق افقی برشی، درجه پیش بندگی، نسبت شانه و ضخامت وب بود. عملکرد برشی بر اساس الگوی ترک خوردگی، رفتار انحراف بار و انعطاف پذیری برش مورد بررسی قرار گرفت. نتایج آزمایش نشان دادند که پرتوهای فولادی پر شده با بتن فوق سبک با مقاومت بالا و مقاومت سایشی بعد از ترک خوردگی، و همچنین نسبت به قابلیت انعطاف پذیری برشی بیشتر از پرتوهای بتنی فوق سبک با مقاومت بالا است. علاوه بر این، تأثیر پارامترهای آزمایشی بر روی عملکرد برشی از پرتوهای فولادی پر شده از بتن پر استحکام بتن پیش ساخته و پرتوهای بتنی فوق باریک بتن نیز مورد بحث و مقایسه قرار گرفت.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Due to the high compressive strength and durability properties of ultra high strength concrete, prestressed ultra high strength concrete beam was used extensively in bridge engineering, but it possessed obvious brittle behavior. Encasing structural steel into it was a good way for alleviating the problem of brittleness. The purpose of this study was to investigate shear performance of prestressed ultra high strength concrete encased steel beams. A total of fifteen prestressed ultra high strength concrete encased steel beams and seven prestressed ultra high strength concrete beams were tested to shear failure under simply supported three-point loading conditions. The primary variables of this investigation included the presence or not of structural steel, shear span-depth ratio, degree of prestress, ratio of stirrup and thickness of web. The shear performance was evaluated based on cracking pattern, load-deflection behavior and shear ductility. Test results showed that prestressed ultra high strength concrete encased steel beams had higher residual shear capacity and post-cracking stiffness as well as by far better shear ductility than prestressed ultra high strength concrete beams. In addition, influence of experimental parameters on the shear performance of prestressed ultra high strength concrete encased steel beams and prestressed ultra high strength concrete beams also was discussed and compared, respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 52, 15 February 2014, Pages 194-201
نویسندگان
, , , ,