Quality control/quality assurance testing for longitudinal joint density and segregation of asphalt mixtures

In general, this study found that methods providing the most reliable measurements of joint quality are the AASHTO T166, AASHTO T331 (CoreLok) density tests and the permeability test by Karol-Warner Permeameter. The minimum required joint density for quality control should be around 90.0% and 88.5% of theoretical maximum density based on the AASHTO T166 and AASHTO T331 method respectively. Based on various mix design and longitudinal joint construction methods, the joints show differences in asphalt content and level of segregation. Results of this study indicate that poor quality of longitudinal joint should be a combination of segregation, asphalt content variation and insufficient density.