کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6741861 1429208 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental study of the performance of intumescent coatings exposed to standard and non-standard fire conditions
ترجمه فارسی عنوان
بررسی تجربی از عملکرد پوشش های درزه ای در معرض شرایط آتش سوزی استاندارد و غیر استاندارد
ترجمه چکیده
سه روش مختلف تجربی مربوط به سه سناریو مختلف آتش سوزی برای بررسی چگونگی شرایط مختلف گرمایشی و میزان گرما بر رفتار دو پوشش نازک نازک (یک رنگ مبتنی بر حلال و یک رنگ آب) تأثیر می گذارد. نمونه های فولادی پوشش داده شده به شرایط مختلف استاندارد و غیر استاندارد در یک کوره الکتریکی، در یک کوره گاز و یک بخاری مخروطی قرار گرفتند. یک روند مشترک در توسعه مقاومت حرارتی پوشش های آزمایش شده مشاهده شد و سه مرحله (فاز غیر مستقیم، فاز گذرا و فاز ثابت) بر اساس چهار نقطه بحرانی شناسایی شد: فعال شدن، پایان واکنش، خستگی گیرنده و نقطه آستنیتی شدن فولاد. نتایج همچنین نشان داد که رنگ رنگ مبتنی بر آب در شرایط گرمایش کمتری بهتر عمل می کند، در حالی که رنگ پایه حلال آزمایش شده با گرمای بالای حرارت بهتر عمل می کند و عایق مناسب را با نرخ حرارت بسیار کم فراهم نمی کند. به طور خلاصه، مطالعه تأیید می کند که روش فعلی برای طراحی پوشش های درخشان، دارای نقایص است، زیرا رنگ های مختلف با توجه به شرایط گرمایشی و به ویژه با توجه به میزان گرمای آتش، عملکرد متفاوت دارند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Three different experimental setups corresponding to three different fire scenarios were used to investigate how different heating conditions and heating rates affect the behaviour of two different thin intumescent coatings (a solvent-based and a water-based paint). Coated steel samples were exposed to different standard and non-standard fire conditions in an electric oven, in a gas furnace and in a cone heater. A common trend was observed in the thermal resistance development of the tested coatings and three phases (inert phase, transient phase and steady phase) were identified according to four critical points: activation, end of reaction, binder exhaustion and steel austenitization point. The results also showed that the water-based paint performed better at low heating rates, while the tested solvent-based paint performed better at high heating rates and did not activate or provide proper insulation at very low heating rates. In summary, the study confirms that the current procedure for the design of intumescent coatings has shortcomings, as different paints have different performances according to the heating conditions and, in particular, according to the fire heating rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fire Safety Journal - Volume 95, January 2018, Pages 42-50
نویسندگان
, , ,