کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6742271 | 504711 | 2013 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A fire test on continuous reinforced concrete slabs in a full-scale multi-story steel-framed building
ترجمه فارسی عنوان
آزمایش آتش سوزی در بتن مسلح بتن مسلح در ساختمان چند طبقه فولادی در مقیاس کامل
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ساختمان فولادی قاب، تست کامل آتش سوزی، اسلب بتنی مداوم، پرتو فولادی، درجه حرارت، انحراف،
ترجمه چکیده
برای بررسی بیشتر رفتار آتش سدهای بتونی طبقه بندی شده، این مقاله نتایج آزمایش آتش را بر روی صفحات بتنی مداوم بتن در یک طبقه فولادی سه طبقه ای کامل بررسی می کند. این مورد تحت مطالعه تجربی مدل واقعی واقعیت شرایط آتش سوزی را بیشتر از آزمایش های قبلی و شامل ساخت کوره ویژه در طبقه دوم ساختمان برای گرم کردن چهار پانل (دو به دو) و پرتوهای فولادی در طبقه سوم. نتایج آزمایشگاهی به طور دقیق مورد بررسی قرار گرفته و درجه حرارت کوره، توزیع دما، انحراف عمودی و افقی و الگوهای شکست در عناصر ساختاری را در مراحل خنک و خنک نگهداری می کنند. داده های آزمایشی نشان می دهد که تعداد و مکان های پانل های گرم شده در کف همچنین تاثیر قابل توجهی بر رفتار آتش نسوز بتن مستمر، جدا از شرایط محدودیت های مرزی ارائه شده توسط اعضای ساختاری مجاور دارد. علاوه بر این، تیرهای فولادی عملکرد مقاومتری نسبت به آتش نشان را نسبت به آنچه که در آزمایشهای استاندارد آتش نشان داده شده است، بر اساس یکپارچگی ساختاری و تعامل بین اعضای ساختمانی نشان می دهد. در مقابل اتصالات با پیچ و مهره های با قدرت بالا، اتصالات جوش داده شده در ساختمان باعث ایجاد لرزش محلی پرتو های فولادی نمی شود.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
To further understand the fire behavior of concrete floor slabs, this paper examines the results of a fire test on continuous concrete floor slabs in a full-scale three-story steel-framed building. The case under experimental study models the reality of fire conditions more closely than previous tests and involves the construction of a special furnace on the building's second floor to heat four panels (two by two) and steel beams on the third floor. The experimental results are investigated in detail and consider the furnace temperature, temperature distribution, vertical and horizontal deflections, and failure patterns of the structural elements during the heating and cooling phases. The testing data indicate that the number and locations of the heated panels in the floor also have a considerable effect on the continuous concrete floor's fire behavior, apart from the boundary constraint conditions provided by the adjacent structural members. In addition, the steel beams exhibit better fire-resistant performance than that observed in standard fire tests depending on their structural integrity and the interaction between structural members. In contrast to its high-strength bolt connections, the building's welded-bolted connections do not cause local buckling of the steel beams subjected to fire.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Fire Safety Journal - Volume 61, October 2013, Pages 232-242
Journal: Fire Safety Journal - Volume 61, October 2013, Pages 232-242
نویسندگان
Y. Wang, Y.-L. Dong, B. Li, G.-C. Zhou,