کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6763877 1431573 2018 37 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Combustion characteristics of a 16 step grate-firing wood pellet boiler
ترجمه فارسی عنوان
ویژگی های احتراق یک دیگ بخار پلت مخصوص چوب 16 سیلندر
کلمات کلیدی
گلوله چوبی، بویلر، احتراق انتقال گرما،
ترجمه چکیده
یک نمونه از یک دیگ 230 درجه سلسیوس کیلوگرم چوب با استفاده از یک گیت چهار مرحله ای تولید و آزمایش شد. شعله از رطوبت تا خروج از محفظه احتراق گسترش یافته و راندمان احتراق ناخوشایند است. برای حل این مشکل، تعدادی از شبکه های آتش نشانی به 16 افزایش یافته و محفظه احتراق برای ارزیابی عملکرد بازسازی شده است. شعله بر روی رطوبت نگه داشته شد و انتظار می رفت که راندمان احتراق بهبود یابد. با این وجود، چهار ترمینال آتش نشانی حتی در شرایط عملیاتی بارگیری 120٪ از ظرفیت طراحی استفاده نشد و اندازه اتاق احتراق افزایش یافت. برای پیدا کردن پیشرفت در این، تجزیه و تحلیل دینامیکی سیالات محاسباتی با استفاده از یک مدل همگن انجام شد. نتایج شبیه سازی نشان داد که افزایش نسبت ابعاد احتراق به احتراق کامل کمک می کند. با این حال، منطقه تجدید پذیر، که به احتراق کمک نمی کند، در انتهای پایین تر رطوبت دیده می شود. بر اساس نتایج آزمایشات و تجزیه و تحلیل عددی، طراحی جدید کوره با شیب پایین و تعداد کمتر از گره ها برای کاهش حجم احتراق، در حالی که هنوز در حال احتراق کامل است، پیشنهاد شد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
A prototype of a 230 kW-class wood pellet boiler employing a four-step grate, was manufactured and tested. The flame extended from the grate to the exit of the combustion chamber, and the combustion efficiency was found to be unsatisfactory. In order to resolve this problem, the number of fire grates was increased to 16, and the combustion chamber was remodeled for performance evaluation. The flame was held on the grate, and as expected, the combustion efficiency improved. However, the last four fire grates were not used even under an operation load condition of 120% of the design capacity, and the size of the combustion chamber increased. To find improvements to this, computational fluid dynamics analysis using a homogeneous model was performed. The simulation results showed that the increase in the aspect ratio of the combustion chamber contributed to complete combustion. However, a recirculation region, not contributing to combustion, was observed at the lower end of the grate. Based on the results of experiments and numerical analysis, a novel furnace design with a lower slope and a smaller number of grates was proposed to reduce the volume of the combustion chamber while still achieving complete combustion.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Renewable Energy - Volume 129, Part B, December 2018, Pages 678-685
نویسندگان
, ,