کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
679559 | 1459952 | 2015 | 6 صفحه PDF | دانلود رایگان |
• Harvesting and cell disruption were simultaneously conducted using ferric ion.
• Ferric sulfate showed lower performance for both processes than ferric chloride.
• Optimal extraction conditions were identified via response surface methodology.
In this study, a simultaneous process of harvesting biomass and extracting crude bio-oil was attempted from wet microalgae biomass using FeCl3 and Fe2(SO4)3 as both coagulant and cell-disrupting agent. A culture solution of Chlorella sp. KR-1 was firstly concentrated to 20 g/L and then proceeded for cell disruption with the addition of H2O2. Optimal dosage were 560 and 1060 mg/L for FeCl3 and Fe2(SO4)3, showing harvesting efficiencies of more than 99%. Optimal extraction conditions were identified via the response surface method (RSM), and the extraction yield was almost the same at 120 °C for both iron salts but FAME compositions after transesterification was found to be quite different. Given iron salts were a reference coagulant in water treatment in general and microalgae harvesting in particular, the present approach of using it for harvesting and oil-extraction in a simultaneous manner can serve as a practical route for the microalgae-derived biodiesel production.
Journal: Bioresource Technology - Volume 191, September 2015, Pages 469–474