Techniques for the measurement of natural product incorporation into an antifouling coating

• Natural product incorporation directly into an antifouling coating.
• Electrochemical impedance spectroscopy showed higher water uptake within modified coating.
• Use of non-destructive techniques to assess coating functionality.

The control of biofouling can be achieved by a variety of methods but for an open system, such as a ship's hull, a protective paint coating is the most adopted method. The incorporation of a natural product extract directly into a coating has received little previous attention. This study has investigated a combination of the antifouling compound (a natural product extract) and the delivery system (control depletion polymer) investigated together. It was necessary to investigate the natural product incorporation into a coating and finally assess the antifouling system including the primer layers in the natural marine environment. Natural products must first be practical as antifoulants to be developed further into a functional system by their incorporation into surfaces or coatings. To demonstrate this, the natural product under investigation was homogenised into a blank proprietary antifouling paint system binder, applied to primed and un-primed ship grade steel and immersed in marine environments. Electrochemical techniques were used to investigate the effects of natural product incorporation into a coating. In addition, optical and scanning electron microscopes were used to assess the physical characteristics of the coating system. The most rigorous test for an antifouling system is a field trial. Field trials were completed at a raft exposure facility, in estuarine dock conditions at the Empress dock, National Oceanography Centre, Southampton, UK.