کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7002893 1454812 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Modelling of leakage on metal-to-metal seals
ترجمه فارسی عنوان
مدل سازی نشت در مهر و موم فلزی به فلز
کلمات کلیدی
ترجمه چکیده
سطوح در مهر و موم معمول نشان می دهد هر دو موج و زبری. انتظار می رود تأثیر تعامل بین این دو مقیاس بر رفتار نشت، مربوط باشد. بنابراین، یک مدل که می تواند آن را مطالعه کند، در اینجا توسعه یافته است. این مدل از مدل های پیشرفته ای برای مکانیک تماس بین سطوح فلزی خشن و جریان مایع از طریق دیافراگم خشن در میان آنها تشکیل شده است. همبستگی بین درصد واقعی منطقه تماس با توپولوژی واقعی تماس و نرخ نشت با تجزیه و تحلیل عددی تایید شد. تغییرات کوچک در موقعیت نسبی بین سطوح تماس، انحراف زیادی در میزان نشت نشان داد. روایی مدل با مقایسه نتایج حاصل از شبیه سازی های عددی با استفاده از مدل و نتایج تجربی که در مقالات به صورت کیفی یافت می شود، توجیه شد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
Surfaces in a typical seal exhibit both waviness and roughness. The influence of the interaction between these two scales on the leakage behaviour is expected to be relevant. Therefore, a model, which can study it, is developed here. The model is composed of state-of-the-art models for the contact mechanics between rough metal surfaces and for the liquid flow through the rough aperture in-between them. Correlation between percentage real contact area and actual contact topology and leak rate was confirmed through numerical analysis. Small changes in relative position between the contacting surfaces showed large deviation in leak rate. The validity of the model was justified by comparing results from numerical simulations using the model and experimental results found in literature qualitatively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 94, February 2016, Pages 421-427
نویسندگان
, , ,