Selective area synthesis of aligned carbon nanofibers by laser-assisted catalytic chemical vapor deposition

Arrays of freestanding bamboo-type carbon nanofibers were grown on the surface of a porous alumina substrate by laser-assisted catalytic chemical vapor deposition. A continuous wave argon ion laser operated at a wavelength of 488 nm was used to thermally decompose pure ethylene over nickel catalysts. Two different catalyst preparation methods were used and are compared with respect to the synthesis of aligned nanofibers. First, a thin nickel film (50 nm) was evaporated on the substrate and was subsequently laser annealed into nanoparticles. This preparation produced non-aligned nanofiber films. Second, a 50 nm thick catalyst layer was electrochemically deposited within the pores of an alumina substrate. This preparation produced an array of vertically aligned nanofibers. A growth rate dependence on radial position within the irradiated area was observed. Average linear growth rates ranging from 554 nm/s to 25 μm/s are reported. The nanofibers were examined by scanning electron microscopy and Raman spectroscopy. Fiber texture and nanotexture were determined by lattice fringe analysis from high resolution transmission electron microscopy images. The alignment mechanism is also discussed.