کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7045229 1457091 2018 45 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Simulation investigation on inlet velocity profile and configuration parameters of louver fin
ترجمه فارسی عنوان
بررسی شبیه سازی پروفیل سرعت ورودی و پارامترهای پیکربندی فیوژن لوور
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
This work aimed to investigate the effect of louver fin configurations on the thermal performance at different Reynolds numbers. The discussed ranges of these geometry parameters were 7.5-12.5 mm (louver length), 8°-20° (louver angle), and 2.25-3.75 mm (louver pitch). The three dimensional CFD simulation was performed and validated with reported experimental data and other simulation results from published articles. The flow and heat transfer characteristics in louver fin were analyzed numerically. Based on these numerical results, a detailed description of Nusselt number and pressure drop was presented and discussed. Two kinds of inlet velocity profiles including Linear-up and Linear-down were investigated. All the numerical data would be presented at different Reynolds number between 70 and 350. In addition, the Nu number correction and pressure drop correction were presented and the optimization of louver fin was obtained. Optimized result was L=7.5mm, α=8°, and Lp=2.25mm. Compared with the reference louver fin, Nu number of the optimized louver fin was decreased by about 24.2%, while the pressure drop was decreased by 36.7%, in turn leading to the increase of PEC by 19%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 138, 25 June 2018, Pages 173-182
نویسندگان
, , , ,