کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7045278 | 1457091 | 2018 | 18 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Design and fabrication of a hydroformed absorber for an evacuated flat plate solar collector
ترجمه فارسی عنوان
طراحی و ساخت یک جذب هیدرومورفورز برای یک صفحه خورشیدی جمع شده خورشیدی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
گرداورنده خورشیدی، تخلیه خلاء، هیدروفرم، توزیع جریان،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A hydroforming facility was built using 85â¯mm thick steel sheet and a 25â¯MPa hydraulic pump. This proved highly effective at forming 0.7â¯mm stainless steel sheet. A total of eight absorbers were fabricated and successfully leak tested using helium. Two variants were made: one kind for use in enclosures with a metallic rear tray, the other for enclosures with glass on both sides. The collector efficiency factor is estimated to be 3% higher than for commercial tube-on-plate designs.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 138, 25 June 2018, Pages 456-464
Journal: Applied Thermal Engineering - Volume 138, 25 June 2018, Pages 456-464
نویسندگان
R.W. Moss, G.S.F. Shire, P. Henshall, P.C. Eames, F. Arya, T. Hyde,