کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7045684 | 1457094 | 2018 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system](/preview/png/7045684.png)
چکیده انگلیسی
Packed bed thermal energy storage (TES) system with phase change material (PCM) encapsulation is one of the potential TES technologies for the solar thermal application. In present study, the constrained melting process of PCM in spherical encapsulation is simulated by a validated natural convection included model. This model is then used to simulate the melting processes of NaNO3 with different conditions. Meanwhile, the same melting processes are also calculated by the conduction controlled model with available effective thermal conductivity correlations reported in the literature. It is found that the changes of liquid fraction obtained from the natural convection included model and the conduction controlled model with the reported thermal conductivity correlations show obvious difference. Then, based on the simulating results of the cases using the natural convection included model, a new correlation for the effective thermal conductivity is proposed by linear regression. It shows that the conduction controlled model with the proposed effective thermal conductivity correlation gives better results on the change of liquid fraction than that with correlations reported in the literature. Therefore, the proposed correlation can be used to calculate the melting process of PCM in a capsule by the conduction controlled model, which is in urgent need for modeling of packed bed latent TES systems.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 135, 5 May 2018, Pages 116-122
Journal: Applied Thermal Engineering - Volume 135, 5 May 2018, Pages 116-122
نویسندگان
Zhirong Liao, Chao Xu, Yunxiu Ren, Feng Gao, Xing Ju, Xiaoze Du,