کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7048069 | 1457126 | 2016 | 20 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaporation characteristics analysis of water film on a spherical solid particle
ترجمه فارسی عنوان
تجزیه و تحلیل ویژگی های تبخیر فیلم آب بر روی یک ذره جامد کروی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تبخیر فیلم آب، ساختار دو لایه کروی، مرز متحرک راه حل تحلیلی، انتقال حرارت و رطوبت،
ترجمه چکیده
یک مطالعه نظری به منظور تجزیه و تحلیل ویژگی های تبخیر گذرا از فیلم آب بر روی یک ذره جامد کروی با سطح آزاد آب در معرض هوا مایع انجام شده است. یک راه حل تحلیلی برای انتقال حرارت گذرا از یک ساختار دو لایه جامد / آب کروی با شرایط مرزی انتقال حرارت حساس و غافلگیرانه در رابط آب / هوا که به دلیل تبخیر آب قابل حرکت است بر اساس روش جداسازی متغیر مشتق شده است. ویژگی های تبخیر فیلم آب برای دماهای مختلف هوا و مواد ذرات جامد مورد بررسی قرار می گیرد. نتایج نشان می دهد که هنگامی که تبخیر آب شروع می شود، دمای سطح آب در ابتدا به شدت تغییر می کند و سپس به آرامی تغییر می کند و در نهایت در دمای مرطوب هوا پایدار می شود. گرمای پنهانی مورد نیاز برای تبخیر آب ممکن است از هر دو فیلم آب توسط هدایت گرما و هوای فشرده بوسیله گرمازدگی یا از طرف دوم صرف نظر از میزان درجه حرارت مرطوب هوا نسبت به دمای آب اولیه حاصل شود. خصوصیات تبخیری گذرا در فیلم آب با ظرفیت گرما بیشتر از هدایت حرارتی ذرات جامد است.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A theoretical study has been conducted to analyze the transient evaporation characteristics of water film on a spherical solid particle, with the water free surface exposed to air fluid. An analytical solution for transient heat transfer of a spherical solid/water bilayer structure with a combined sensible and latent heat transfer boundary condition at the water/air interface that is movable due to the water evaporation is derived based on the method of variable separation. The water film evaporation characteristics are analyzed for different air temperatures and solid particle materials. The results show that when water evaporation begins, the water surface temperature initially changes sharply, then more gently, and eventually stabilizes at the air wet-bulb temperature. The latent heat needed for the water evaporation may come from both the water film by heat conduction and the bulk air by heat convection, or from the latter only, depending on the magnitude of the air wet-bulb temperature relative to the initial water temperature. The water film transient evaporation characteristics are affected more by the heat capacity than by the thermal conductivity of the solid particle.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 102, 5 June 2016, Pages 539-547
Journal: Applied Thermal Engineering - Volume 102, 5 June 2016, Pages 539-547
نویسندگان
Yicun Tang, Jingchun Min,