کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7048112 1457126 2016 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Performance study of latent heat accumulators: Numerical and experimental study
ترجمه فارسی عنوان
بررسی عملکرد باتری های پنهان: مطالعه عددی و تجربی
کلمات کلیدی
ذخیره سازی گرم، مواد تغییر فاز، مدل سازی، بهینه سازی، باتری های حرارتی،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
This study focuses on the optimization of a phase change heat accumulator used in engine cooling loop of automotive applications. Heat transfer is mainly limited by the low PCM heat transfer rate, due to a relatively low thermal diffusivity. A significant conductivity enhancement can be achieved by adding fins, but this also leads to decrease the heat storage capacity of the accumulator by reducing the volume available for phase change materials. Thus, geometry characteristics of fins such as pitch, height and thickness play an important role in the performance and storage capacity of the heat accumulator and should be considered carefully. In order to optimize these geometric parameters, a numerical model is developed to simulate various configuration of heat accumulator. The simulation results are presented and used to define a set of optimal solutions based on heat transfer rate and heat storage capacity. The model can be easily applied to similar geometries, materials or applications. Results show that there is an optimal height of fins that provides a satisfying heat transfer rate. On the other hand, pitch and thickness of fins should be the smallest as possible to improve contact points between fins and wall and to improve temperature homogeneity. However, results show that optimal design of fins depends on flow conditions and, several optimal may be defined considering heat accumulator application.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 102, 5 June 2016, Pages 604-614
نویسندگان
, , , , ,