کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7048462 1457130 2016 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitated channels
ترجمه فارسی عنوان
مطالعه عددی در مورد تغییر شکل حرارتی آینه آبی سرد با کانال های بین دیاگرام
ترجمه چکیده
یک آینه جدید با آب سرد با کانال های بین دیاگرام پیشنهاد شده است که برای حل مسائل مقاومت در برابر جریان بالا و انتشار گرما غیرموضوع در یک آینه با آب سرد معمولی با کانال های مستقیم پیشنهاد شده است. دمای دما و تغییر شکل حرارتی سطح بازتابی آینه با شبیه سازی کوپلینگ سیال - جامد - حرارت بررسی می شوند. تجزیه و تحلیل تطبیقی ​​پیکربندی جدید و آینه آبی سرد کن معمولی کانال مستقیم به ترتیب تحت جریان جریان برابر و افت فشار برابر است. نتایج عددی نشان می دهد که پیکربندی جدید بر پایه ی ضریب انتقال گرما بهتر از آنچه معمول است، بهتر است. در همان زمان، در شرایط جریان جریان برابر، مقدار پیک تغییر شکل در سطح بازتابی حدود 1/3 کاهش می یابد و اعوجاج حرارتی جهانی درون منطقه مورد مطالعه تنها حدود نیمی از آن متعارف است. علاوه بر این، مقاومت جریان از پیکربندی جدید بسیار کوچک است که جریان جریان حدود سه برابر پیکربندی معمولی در شرایط افت افت فشار برابر است که برتری آن را نسبت به سایر طرح ها افزایش می دهد. ساختار کانال جریان جدید یک راه حل عملی برای کاهش تغییر شکل حرارتی یک آینه بزرگ اندازه لایه را فراهم می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A novel water-cooled mirror with interdigitated channels is proposed for solving the problems of high flow resistance and non-uniform heat dissipation in a conventional water-cooled mirror with straight channels. The temperature field and the thermal deformation of the reflecting surface of the mirror are analyzed by fluid-solid-heat coupling simulation. A comparative analysis of the new configuration and the conventional straight channel water-cooled mirror is carried out under equal flow rate and equal pressure drop, respectively. The numerical results demonstrate that the new configuration is better on the consistency of heat transfer coefficients than the conventional one. At the same time, under the condition of equal flow rate, the peak value of the deformation on the reflecting surface is decreased by around 1/3, and the global thermal distortion within the irradiated region is only about half that of the conventional one. Besides, the flow resistance of the new configuration is so small that the flow rate is about triple that of the conventional configuration under the condition of equal pressure drop, which raises its superiority over other designs. The new flow channel structure provides a feasible solution to reduce the thermal deformation of a large size laser mirror.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 98, 5 April 2016, Pages 357-364
نویسندگان
, , , ,