کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7049601 | 1457162 | 2013 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A multi-artery vapor chamber and its performance
ترجمه فارسی عنوان
اتاق بخار چند بخشی و عملکرد آن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
محفظه بخار، لوله حرارتی، چند شریان، مقاومت حرارتی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A multi-artery vapor chamber was designed, built and tested in this study. In this vapor chamber, the wick structure consists of sintered copper powder layers on the top and bottom plates, operating as evaporator and condenser wick respectively, and sintered copper powder rings embedded with solid copper columns operating as liquid flow path. Copper powder rings contact the tip of the condenser and evaporator wicks directly to provide a short return path for the working fluid. Solid copper columns are welded together with the top and bottom plate to prevent deformation of the vapor chamber, which is caused by the internal and external pressure difference. An experimental system with joule heating and water cooling was built. Thermal resistance was defined to characterize the performance. The performance of the vapor chamber under different heat loads, heating areas and heating modes were tested and analyzed. The lowest measured thermal resistance is less than 0.08Â KÂ cm2/W using a 1Â cm2 heat source. The maximum tested heat flux is 300Â W/cm2 without the capillary or boiling limits reached. As compared with the vapor chambers reported in the literature, this vapor chamber has a very good performance and can be easily manufactured with low cost.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 60, Issues 1â2, 2 October 2013, Pages 15-23
Journal: Applied Thermal Engineering - Volume 60, Issues 1â2, 2 October 2013, Pages 15-23
نویسندگان
Yong Tang, Dong Yuan, Longsheng Lu, Zhenyong Wang,