کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7050144 | 1457163 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Model and process simulation of microwave assisted convective drying of clipfish
ترجمه فارسی عنوان
مدل سازی و شبیه سازی فرایند خشک کردن کنترا از ماهی مرکب به کمک مایکروویو
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
خشک کردن پمپ حرارت، خشک کردن میکروویو ترکیبی، شبیه سازی روند دینامیک،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Microwave (MW) assisted convective drying of clipfish (cured cod) was investigated at different intensities. The determined kinetics show that the drying time can decrease by over 90% at a microwave intensity of 155 W kgâ1. However, quality aspects limited the microwave application to maximum intensities of 65 W kgâ1, where the drying time is still decreased by 35%. The determined drying kinetics where used to model a 40 ton tunnel dryer for clipfish in a dynamic simulation. The energy consumption of a 200 kW heat pump drying system (HPD) and a heated ambient air drying system (HAAD) were investigated for different microwave intensities. The energy consumption for the HPD system was 171 kW h tâ1 and it was 445 kW h tâ1 for the HAAD system. For the microwave assisted drying systems the energy consumption increased up to 4465 kW h tâ1. Microwave hybrid drying of clipfish is therefore considered uneconomical despite the faster drying kinetics. Economical energy levels for MW-HPD would have to be below 1.6 W kgâ1 and 6.2 W kgâ1 for MW-HAAD, at a drying time reduction of 50%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Thermal Engineering - Volume 59, Issues 1â2, 25 September 2013, Pages 675-682
Journal: Applied Thermal Engineering - Volume 59, Issues 1â2, 25 September 2013, Pages 675-682
نویسندگان
Michael Bantle, Timo Käfer, Trygve M. Eikevik,