کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7054007 1458015 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Study on influence of lateral liquid feeding into crystallizer on solidification process of copper billets
ترجمه فارسی عنوان
بررسی تأثیر تغذیه مایع جانبی در کریستالیزر در فرآیند جامد سازی مس و مس
ترجمه چکیده
اولین فرآیند تولید، یعنی فرایند ریخته گری افقی، به طور مستقیم بر عملکرد لوله های مس به پایان رسید. محاسبات عددی و تجزیه و تحلیل مقایسه ای برای میدان جریان و میدان های میکروساختار جریان و خرد شدن مایع ریخته گری در دو نوع بلورسرسر برای ریخته گری مداوم افقی انجام شد. مشخص شد که عوامل داخلی در تأثیر تبادل گرما داخلی کریستالیزر و یکنواختی ریزساختار ریخته گری، تاثیر متقاطع و شدت آشفتگی است. پارامترهای ساختاری ورودی مایع یک کریستالیزور با باز شدن جانبی، یعنی زاویه شیب پیشین و زاویه شیب جانبی ورودی مایع، از منبع مورد بررسی قرار گرفت و مقادیر مناسب پارامتر ورودی مایع برای بهبود کیفیت بلت ریخته شده در نهایت به دست آمده با میانگین مقدار حداکثر سرعت چرخش، شدت آشفتگی و اندازه دانه های ریز ساختاری ریخته گری به عنوان معیار ارزیابی بدست آمده است. دقت محاسبات عددی به صورت بصری از طریق تجزیه و تحلیل تجربی متالوگرافی تأیید شد. این مطالعه مبنای تئوری ارزیابی قابل اندازه گیری برای تولید لوله داخلی لوله جوش با مبدل حرارتی کارآمد است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The first process in the production, namely, horizontal continuous casting process, directly influences the performances of finished copper tubes. Numerical calculation and comparative analysis were conducted for the flow field and microstructural field of the flow and solidification of casting liquid in two kinds of crystallizers for horizontal continuous casting. It was found that the internal factors influencing the internal heat exchange effect of crystallizer and the microstructural uniformity of casting billets are swirl effect, and turbulence intensity. The structural parameters of liquid inlet of a crystallizer with lateral opening, i.e., the forward tilt angle and lateral tilt angle of liquid inlet, were analyzed from the source, and the reasonable parameter values of liquid inlet for improving the quality of casting billets were finally obtained with the mean value of maximum spin speed, the turbulence intensity, and the microstructural grain size of casting billet as evaluation criteria. The accuracy of the numerical calculation was visually verified through metallographic experimental analysis. This study provides measurable reference theoretical basis for production of inner grooved copper tube with efficient heat exchange.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 125, October 2018, Pages 104-115
نویسندگان
, , , , , ,