کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7054167 1458016 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A simplified energy dissipation based model of heat transfer for post-dryout flow boiling
ترجمه فارسی عنوان
یک مدل مبتنی بر تلفات انرژی ساده انتقال گرما برای جوشاندن جریان پس از خشک کردن
کلمات کلیدی
خشک کردن پست جریان غبار، مدل سازی،
ترجمه چکیده
یک مدل برای انتقال گرما جریان گرمای خاموش پس از خشک شدن بر اساس ملاحظات انرژی آزاد شدن در جریان ارائه شده است. این مدل گسترش یک مدل نویسندگان است که قبلا برای جوش جریان جریان اشباع شده و سوپاپوئید ساخته شده است. در مدل پیشین مدل، ضریب انتقال حرارت برای یک ترانزیستور تک فاز مایع به عنوان مرجع به دلیل عدم وجود مدل مناسب برای ضریب انتقال گرما برای جوش جریان جوش استفاده شده است. این موضوع ضعف اساسی رویکرد سابق بود. هدف تحقیق حاضر این است که این نقص را برطرف کند. در حال حاضر ضریب انتقال گرما مرجع برای جریان جوش اشباع شده است که مربوط به بخار جریان پایان جریان غبار. شار گرما دیواره بر اساس پارتیشن بندی و تشکیل دو جزء اصلی، یعنی جریان شار حرارتی برای جریان بخار در نزدیکی دیواره و دو قطعه قطره جریان بخار در جریان هسته است. هر دو اصطلاح به این ترتیب مدل شده اند. نتایج محاسبات با برخی از همبستگی های تجربی از ادبیات نشان داده شده است که نشان می دهد سازگاری خوب است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
A model for post dryout mist flow heat transfer is presented based on considerations of energy dissipation in the flow. The model is an extension of authors own model developed earlier for saturated and subcooled flow boiling. In the former version of the model the heat transfer coefficient for the liquid single-phase convection as a reference was used, due to the lack of the appropriate model for heat transfer coefficient for the mist flow boiling. That issue was a fundamental weakness of the former approach. The purpose of present investigation is to fulfil this drawback. Now the reference heat transfer coefficient for the saturated flow boiling is that corresponding to vapour flow the end of the mist flow. The wall heat flux is based on partitioning and constitutes of two principal components, namely the convective heat flux for vapour flowing close to the wall and two phase flow droplet-vapour in the core flowing. Both terms are accordingly modelled. The results of calculations have been compared with some experimental correlations from literature showing a good consistency.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 124, September 2018, Pages 260-268
نویسندگان
, ,