کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7054231 1458016 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermal performance improvement based on the partial heating position of a heat sink
ترجمه فارسی عنوان
بهبود عملکرد حرارتی بر اساس موقعیت حرارتی جزئی گرمادهی گرما
کلمات کلیدی
ترجمه چکیده
عملکرد حرارتی یک سینک گرما با توجه به موقعیت سطح بخار گرمایی آنالیز می شود. مدل های عددی برای شبیه سازی اتصال اجباری به منظور تحلیل انتقال حرارت بین سینک گرما و هوای محیط مورد استفاده قرار گرفت. موقعیت گرمایی بخار بهینه در رابطه با اثرات کل انتقال حرارت، سرعت هوای، نسبت طول کل خنک کننده به سطح به سطح بخشی جزئی گرم، هدایت حرارتی گرما و ضخامت پایه گرما . در نهایت، برای تعیین موقعیت حرارتی جزئی که با استفاده از روش طراحی آزمایشگاهی، حداکثر عملکرد حرارتی، رابطه ایجاد می شود. بدین ترتیب ممکن است با یافتن موقعیت مطلوب گرمایی جزئی، مقاومت گرمادهی گرما را تا حدود 30 درصد کاهش دهد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
The thermal performance of a heat sink is analyzed according to the position of the partially heated surface. Numerical models for simulating forced convection were used to analyze the heat transfer between the heat sink and ambient air. The optimal partial heating position was discussed in terms of the effects of total heat transfer rate, air velocity, the ratio of total heat sink length to partially heated surface width, the thermal conductivity of the heat sink, and the thickness of the heat sink base. Finally, a correlation was suggested to determine the partial heating position that maximizes thermal performance by using the experimental design method. It was thus possible to reduce the thermal resistance of the heat sink by up to approximately 30% by finding the optimal partial heating position.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 124, September 2018, Pages 752-760
نویسندگان
, , , ,