کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7056385 | 1458051 | 2015 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Heat transfer in ultra-high temperature advanced ceramics under high enthalpy arc-jet conditions
ترجمه فارسی عنوان
انتقال حرارت در سرامیک های پیشرفته با درجه حرارت فوق العاده بالا تحت شرایط انکالتیک با دمای بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
چکیده انگلیسی
Aim of this work is to analyze the response of an ultra-high temperature ceramic at typical heat flux conditions of thermal protection systems of a re-entry spacecraft. In particular, a ZrB2-SiC based ultra-high temperature advanced ceramic sharp leading edge demonstrator (1Â mm nominal radius of curvature) was manufactured and tested in a non-equilibrium high enthalpy supersonic airflow, 20Â MJ/kg of peak total enthalpy, by using an arc-jet ground facility. The surface temperature of the leading edge was monitored by infrared thermo-cameras coupled to a two-color pyrometer. The ultra-refractory advanced ceramic leading edge withstood stressful thermo-chemical loads successfully, without obvious failure. Ad-hoc computational fluid dynamics simulations rebuilt the adopted set-up and related experiment conditions: the numerical outputs matched fairly well the experimental in-situ determinations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 91, December 2015, Pages 747-755
Journal: International Journal of Heat and Mass Transfer - Volume 91, December 2015, Pages 747-755
نویسندگان
Anselmo Cecere, Raffaele Savino, Christophe Allouis, Frédéric Monteverde,