کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7058929 1458081 2013 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Vapor chambers with jumping-drop liquid return from superhydrophobic condensers
ترجمه فارسی عنوان
اتاق های بخار با مایع پرشده-قطره ای از خازن های سوپر هیدروافوبی باز می گردند
ترجمه چکیده
در سیستم های تغییر فاز بسته، پرش های خودپرداز بر روی یک کندانسور سوپر هیدروفاژ، مکانیسم جدیدی برای بازگشت مایع کار به تبخیر کننده ارائه می دهد که نیاز به نیروهای خارجی و یا جک های در طول مسیر بازگشت را از بین می برد. در اینجا ما عملکرد انتقال حرارت یک اتاق بخار پرش دوتایی را که شامل دو صفحه ی موازی، یک کندانسور سوپر هیدروفوف و یک اواپراتور سوپر هیدروفیلی است، گزارش می کنیم. با حذف مناسب گازهای غیر قابل انعطاف از جمله آنهایی که در مایع کاری حل شده اند، مقاومت حرارتی کلی کاسه پرش به قطر عمدتا توسط مقاومت هدایت اواپراتور بد در سری با مقاومت مقاومت بین فاز در رابط های فاز تغییر . مدل مقاومت مقاومت توزیع شده با تغییر سیستماتیک پارامترهای محفظه مانند ضخامت چوب، فاصله بخار، دمای بخار و شار گرما مورد تایید قرار گرفت. به عنوان یک مکانیزم جایگزین برای انتقال مایع کار، قطره های پرش می توانند سیستم های جدید انتقال حرارت فاز مانند دیود حرارتی فضایی و پخش گرما را فعال کنند، که این کار دستورالعمل های طراحی عملی را فراهم می کند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
In closed-loop phase-change systems, self-propelled jumping drops on a superhydrophobic condenser offer a new mechanism to return the working fluid to the evaporator, eliminating the requirement for either external forces or wick structures along the return path. Here, we report the heat transfer performance of a jumping-drop vapor chamber consisting of two parallel plates, a superhydrophobic condenser and a superhydrophilic evaporator. With proper removal of the non-condensable gases including those dissolved in the working fluid, the overall thermal resistance of the jumping-drop chamber is primarily governed by the conduction resistance of the wicked evaporator in series with the interfacial resistances at the phase-change interfaces. The lumped resistance model was verified by systematically varying the parameters of the chamber such as wick thickness, vapor spacing, vapor temperature, and heat flux. As an alternative mechanism to transport the working fluid, the jumping drops can enable novel phase-change heat transfer systems such as planar thermal diodes and heat spreaders, for which this work provides practical design guidelines.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 61, June 2013, Pages 409-418
نویسندگان
, ,