کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7082764 1460004 2013 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermochemical conversion of crude glycerol to biopolyols for the production of polyurethane foams
ترجمه فارسی عنوان
تبدیل ترمو شیمیایی گلیسرول خام به بیوپلیول ها برای تولید فوم های پلی اورتان
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی تکنولوژی و شیمی فرآیندی
چکیده انگلیسی
This study aimed to produce biopolyols from crude glycerol via a novel thermochemical conversion process. The effect of operational parameters, including sulfuric acid loading and reaction temperature and time, on the properties of the produced biopolyols was investigated. Biopolyols produced under preferred reaction conditions of 200 °C, 90 min, and 3% sulfuric acid loading showed a hydroxyl number of around 481 mg KOH/g, an acid number of around 5 mg KOH/g, and a viscosity of around 25.0 Pa s. The resulting polyurethane (PU) foams showed a compressive strength of around 184.5 kPa and a density of around 43.0 kg/m3, comparable to those of some petroleum-based analogs. Characterization of the biopolyols via pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), gas chromatography (GC), and thermogravimetrical analysis (TGA) showed that the major reactions of this process were the formation of monoglycerides and diglycerides through the esterification and transesterification of different components in crude glycerol.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Bioresource Technology - Volume 139, July 2013, Pages 323-329
نویسندگان
, , , ,