کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7120182 | 1461460 | 2018 | 42 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite](/preview/png/7120182.png)
چکیده انگلیسی
This paper focuses on the tribo-responses of as-cast Al 7075/Al2O3 composite and its unreinforced base alloy under two-body abrasion. Composite prepared by stir casting route shows near uniform distribution of 20â¯wt.% Al2O3 particles in the matrix of Al-alloy. The effects of four control factors i.e., load, SiC abrasive grit size, sliding distance and sliding velocity on three tribo-responses i.e., wear rate, coefficient of friction and roughness of worn surface have been investigated separately for base alloy and composite using pin-on-disc tribometer. Design of test conditions and analyses of output responses have been performed following standard statistical tools of Taguchi orthogonal array, analysis of variance (ANOVA) and regression methods. Composite demonstrates reduced wear rate and lower coefficient of friction, but higher surface roughness as compared to base alloy under all investigated test conditions. The predominant control factor is found to be abrasive grit size followed by load for all tribo-responses except roughness of worn composite surfaces wherein the load plays major role. The optimal combination of control factors of different tribo-responses have been identified considering smaller-is-better approach. Confirmatory tests carried out to validate the developed models yield low errors (8.1-2.6%) exhibiting excellent correlations. Enhanced tribological properties of composite over base alloy has been explained by identification of wear mechanisms through characterizations of worn surface, wear debris and abraded abrasive medium.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 127, October 2018, Pages 42-62
Journal: Measurement - Volume 127, October 2018, Pages 42-62
نویسندگان
Santanu Sardar, Santanu Kumar Karmakar, Debdulal Das,