کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7158558 1462797 2018 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Exergoeconomic-optimized design of a solar absorption-subcooled compression hybrid cooling system for use in low-rise buildings
ترجمه فارسی عنوان
طراحی اگزوژیکو-بهینه سازی یک سیستم خنک کننده هیبریدی فشرده سازی جذب-خنک کننده خورشیدی برای استفاده در ساختمان های کم ارتفاع
کلمات کلیدی
ترجمه چکیده
طراحی بهینه شده برای یک سیستم خنک کننده هیبریدی فشرده سازی جذب-خنک کننده خورشیدی که در ساختمان های کم ارتفاع استفاده می شود، به دلیل ملاحظات کلی افزایش هزینه های سرمایه گذاری و صرفه جویی در انرژی است که با افزایش حجم زیر سیستم جذب همراه است. برای این منظور، مهمترین نقش این مقاله، طراحی مجدد اگزوجو-اقتصاد بهینه از سیستم خنک کننده هیبریدی فشرده سازی جذب-خنک کننده خورشیدی است که در ساختمان های کم ارتفاع مورد استفاده قرار می گیرد. در این مقاله، به دلیل تغییرات قابل توجه در جریان هزینه سوخت، نه تنها حداقل هزینه جریان محصول، بلکه همچنین کمترین تفاوت هزینه نسبی نیز به عنوان عملکرد هدف در نظر گرفته می شود. نتایج بهینه سازی اگزرژئوئیک نشان می دهد که ظرفیت خنک سازی واقعی زیر سیستم جذب نباید بر اساس حداکثر منطقه جمع کننده طراحی شود. در عوض، منطقه واقعی جمع آوری شده نصب شده باید توسط ظرفیت خنک کننده مطلوب زیر سیستم جذب تعیین شود. همچنین مشخص شد که ظرفیت خنک کننده مطلوب زیر سیستم جذب به شدت به خواسته های خورشید و خورشید بستگی دارد. علاوه بر این، اندازه های مطلوب برای زیر سیستم جذب باید با توجه به حداقل هزینه های مختلف هزینه های محصول یا پایین ترین هزینه نسبی هزینه طراحی شده باشد، و این تفاوت نسبت به میانگین خورشید متوسط ​​محاسبه شده است، اما ضعیف بر تقاضای خنک کننده متکی است. این مقاله در طراحی هزینه های آن برای یک سیستم خنک کننده جذب خورشیدی جذب خنک کننده خنک کننده با استفاده از ساختمان های کم ارتفاع مفید است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
An optimized design for a solar absorption-subcooled compression hybrid cooling system used in low-rise buildings is complicated because of the overall considerations involving increases in investment costs and energy savings, which are associated with an increase in the size of the absorption subsystem. To this end, this paper's main contribution lies in its exergoeconomic-optimized design of a solar absorption-subcooled compression hybrid cooling system employed in low-rise buildings for different design cases. In this paper, not only the minimum product-cost flow rate but also the lowest relative cost difference is taken as the objective function owing to the notable changes in fuel cost flow rates. The results of the exergoeconomic optimization shows that the actual cooling capacity of the absorption subsystem should not be designed based only on the maximum collector area. Instead, the actual installed collector area should be determined by the optimal cooling capacity of the absorption subsystem. It was also found that the optimal cooling capacity of the absorption subsystem strongly depends on solar irradiance and cooling demands. In addition, optimal sizes for the absorption subsystem should be designed according to the different minimum product cost flow rates or the lowest relative cost difference, and this difference is sensitive to the local mean solar irradiance but weakly relies on the cooling demand. The paper is helpful in its cost-effective design for a solar absorption-subcooled compression hybrid cooling system used in low-rise buildings.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 165, 1 June 2018, Pages 465-476
نویسندگان
, , , , ,