کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7172758 | 1463809 | 2011 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy](/preview/png/7172758.png)
چکیده انگلیسی
The initial induced compressive residual stresses relax during component operating life and it is important to consider the relaxation phenomenon in the design of the component. In this study, 2024-T 351 aluminium alloy specimens were shot peened under three different shot-peening intensities. Cyclic tests for two load magnitudes were performed for 1, 2, 10, 1000 and 10,000 cycles. The initial and final residual stresses and the cold work after each loading cycle were measured for the three shot-peening intensities and for the two load magnitudes using X-ray diffraction. The initial and final microhardnesses after each loading cycle load were also measured for the three shot-peening intensities. The results showed that the reduction in the residual stress, microhardness and cold work are dependent on the applied load. An empirical model was proposed to estimate the residual stress relaxation. The presented model incorporates parameters including the degree of cold work, initial induced residual stress and the number of applied loading cycles.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Fatigue - Volume 33, Issue 2, February 2011, Pages 279-285
Journal: International Journal of Fatigue - Volume 33, Issue 2, February 2011, Pages 279-285
نویسندگان
Omar Suliman Zaroog, Aidy Ali, B.B. Sahari, Rizal Zahari,