Liquid Jet Ejector Efficiency Improvement

The issues of application of an agitator, a diffuser, and a vertical pipe in a liquid jet ejector are considered. Possible versions of an agitator as a rotating nozzle with blades are recommended. A physical and mathematical model based on fundamental equations, which reflect the operating process of the device, is developed. The estimated dependencies and restrictive conditions of operation of the electrically driven rotating nozzle and blades ejector are provided. The increase in the efficiency of application of the agitator, diffusor, and vertical pipe is numerically quantified by means of extreme characteristics. Thus, a maximum efficiency gain of 37% after agitator is installed; 13% when diffuser is installed; 5% when vertical pipe is installed can be reached. The characteristics that reflect the relationship of maximum attainable operating parameters and the corresponding values of optimum relative nozzle area are obtained. The constancy of the optimum relative nozzle area in a wide range of operating parameters, while using the agitator alongside the diffuser and the vertical pipe, is revealed. Hence, if the agitator is applied, the optimum relative nozzle area is 0.29 ... 0.30, if the diffusor and vertical pipe are added, then - 0.40 ... 0.41. The recommendations on the implementation of the obtained results are made.