Reduced leakage current of nickel induced crystallization poly-Si TFTs by a simple chemical oxide layer

Ni-metal-induced crystallization (MIC) of amorphous Si (α-Si) has been used to fabricate low-temperature polycrystalline silicon (poly-Si) thin-film transistors (TFTs). However, the leakage current of MIC-TFT is high. In this study, a chemical oxide layer was used to avoid excess of Ni atoms into α-Si layer during MIC process, which was simple and without extra expensive instrument. The minimum leakage current and on/off current ratio were significantly improved.

► Chemical oxide filter layer was introduced into MIC processes to reduce the leakage current of MIC TFT.
► Process was very simple and without extra expensive instrument.
► CF-MIC TFT shows a 14.3-fold decrease in the minimum leakage current and a 17.3-fold increase in the on/off current ratio.
► Chemical oxide layer can avoid Ni directly contact with α-Si, avoid excess of Ni atoms into α-Si layer and remove unreacted Ni easily from surface.