Miniature and tunable millimeter-wave lowpass filter with MEMS switch

In this paper, fully monolithic tunable millimeter-wave filters with tapped-line feedings are proposed using the CPW-based periodic structures with novel multiple-contact MEMS switches. Millimeter-wave low-pass filters were designed, fabricated, and tested. The cascaded CPW-based periodic structures, with low-pass intrinsic filtering characteristics, are reconfigured into a self-similar single unit cell by the operation of the novel multiple-contact MEMS switches with single actuation. The measured results of the reconfigurable low-pass filter show the 3-dB cutoff frequency change from 19 to 11 GHz with very small change in the average insertion loss from 1.3 to 1.9 dB. The chip size of the low-pass is 4.0 mm × 1.6 mm.

► The study paper reports stated a novel tunable millimeter-wave lowpass filter.
► The proposed concept can be satisfied the requirement of integrated RF Front–End system on the chip.
► It is possible to achieve miniaturization of filter. It is important for the next generation wireless communications.