کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7541469 1489049 2018 54 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Transient analysis of quality performance in two-stage manufacturing systems with remote quality information feedback
ترجمه فارسی عنوان
تجزیه و تحلیل گذار از عملکرد کیفی در سیستم های تولید دو مرحله ای با بازخورد اطلاعات کیفی از راه دور
کلمات کلیدی
ترجمه چکیده
به تازگی مدل سازی و تجزیه و تحلیل انتشار محصول با کیفیت در سیستم های چند مرحله ای تولید شده است توجه زیادی را به خود جلب کرده است. با این حال، اکثر نتایج موجود بر روی عملکرد ثابت دولت تمرکز می کنند، در حالی که تجزیه و تحلیل های گذرا از کیفیت سیستم عمدتا کاوش نشده است. هنگامی که تغییر محصول یا تعمیرات برنامه ریزی شده اتفاق می افتد، کیفیت سیستم ممکن است تحت تأثیر گذار باشد، که رفتار سیستم را توصیف می کند قبل از نزدیک شدن به حالت پایدار در سطح هدف و کیفیت. از اهمیت زیادی برخوردار است که به طور جامع کیفیت عملکرد را به ویژه در طی گذراندن دوره ها بررسی کند تا کاهش کیفیت و بهبود کیفیت محصولات را کاهش دهد. در این مقاله، یک مدل مارکوف برای ردیابی کیفیت در یک سیستم تولید دو مرحلهای با بازخورد اطلاعات کافی از راه دور در طی گذرگاهها توسعه داده شده است. بر اساس مدل ریاضی پیشنهاد شده، فرمول های تحلیلی برای ارزیابی عملکرد کیفیت گذرا، از جمله کیفیت محصول در زمان واقعی، زمان استقرار، و از دست دادن کیفیت به دلیل گذرا، مشتق می شوند. علاوه بر این، خواص تک رنگی ویژگی های سیستم انتقالی انتقالی و معیارهای عملکرد کیفیت کاوش می شود. روش پیشنهادی با داده های عددی و داده های دنیای واقعی معتبر است و نتایج آن را اثبات می کند برای تجزیه و تحلیل کیفیت گذرا در سیستم های تولید دو مرحله ای.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
Recently modeling and analysis of product quality propagation in multi-stage manufacturing systems has received lots of attention. However, most existing results are focused on steady state performance, while transient analysis of system quality remains largely unexplored. When product changeover or scheduled maintenance happens, the system quality may undergo transients, which describe the system quality behavior before approaching the steady state at targeted levels of quality and cost. It is of practical importance to comprehensively investigate the quality performance especially during transients in order to reduce quality loss and improve product quality. In this paper, a Markov model is developed to address quality propagation in a two-stage manufacturing system with remote quality information feedback during transients. Based on the proposed mathematical model, analytical formulas for evaluating transient quality performance including the real-time product quality, settling time, and quality loss due to transients, are derived. In addition, the monotonicity properties of critical transient system characteristics and quality performance metrics are explored. The proposed method is validated with numerical data and real-world data, and the results demonstrate the effectiveness for transient quality analysis in two-stage manufacturing systems.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Computers & Industrial Engineering - Volume 117, March 2018, Pages 262-281
نویسندگان
, , ,