کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7724296 | 1497590 | 2011 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Printed Co3O4 film as an electrocatalyst for hydrogen production by a monolithic photovoltaic-electrolysis system
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In a monolithic photovoltaic-electrolysis system, photovoltaic and catalytic layers are generally constructed on both sides of a conducting substrate. For the realization of this architecture it is critical to fabricate the catalytic layer at sufficiently low temperature in order not to deteriorate the photovoltaic photoanode that is already installed on the reverse side of the catalytic layer. In this study we demonstrate successful fabrication of Co3O4 electrocatalyst films at low temperature (â¼50°C) on a stainless steel substrate by a paste coating method using Nafion as a binder. The Co3O4 films were found to be catalytically efficient and stable in water splitting reaction in an alkaline aqueous solution. More importantly, the Co3O4 films casted at low temperature (â¼50°C) revealed the highest hydrogen production rate in the electrolytic cell compared to the films prepared at higher temperatures (e.g. 150 and 300°C), which would be very beneficial in the construction of a monolithic photovoltaic-electrolysis system.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Hydrogen Energy - Volume 36, Issue 3, February 2011, Pages 1924-1929
Journal: International Journal of Hydrogen Energy - Volume 36, Issue 3, February 2011, Pages 1924-1929
نویسندگان
Hyo Sang Jeon, Wonil Park, Jaehoon Kim, Honggon Kim, Woong Kim, Byoung Koun Min,