کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
781121 | 1463796 | 2012 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Adopting lock-in infrared thermography technique for rapid determination of fatigue limit of aluminum alloy riveted component and affection to determined result caused by initial stress Adopting lock-in infrared thermography technique for rapid determination of fatigue limit of aluminum alloy riveted component and affection to determined result caused by initial stress](/preview/png/781121.png)
The lock-in infrared thermography technique was adopted to rapidly determine the fatigue limits of two kinds of riveted components, which were both made of 2A12 aluminum alloy and had different magnitudes of interference. The results obtained by the lock-in infrared thermography technique were compared with the existing fatigue limits of 2A12 aluminum alloy, and experimental research based on the staircase method was also carried out. It is shown that the magnitudes of interference and the corresponding initial stresses have important and apparent affections to the results determined by the lock-in infrared thermography technique.
► Fatigue limits of two kinds of riveted components are rapidly determined by lock-in infrared thermography technique.
► The rapidly determined results of conventional riveted components are proved to be accurate.
► The rapidly determined results of large interference riveted components are proved to be incorrect.
► It is proved that the initial stresses around riveted holes affect the rapidly determined results obviously.
Journal: International Journal of Fatigue - Volume 36, Issue 1, March 2012, Pages 18–23