کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7825012 | 1502922 | 2018 | 25 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
On merging DMA and microindentation to determine local mechanical properties of polymers
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Micro- and nanoindentation and Dynamic Mechanical Analysis (DMA) are different methods to determine mechanical and viscoelastic material properties. The aim of this study was to broaden the capabilities of their utilization by merging these methods. Three standard diamond indenters and a tungsten needle were implemented in a conventional DMA. Four types of standard polymers were investigated. Quasi-static microindentation was performed to determine local material static stiffness, and dynamic microindentation was performed to evaluate local material complex modulus. The results of the quasi-static microindentation showed that different static stiffnesses of the polymers can be distinguished. Even the smallest differences in local mechanical properties due to processing and annealing were distinguished. The complex moduli determined by dynamic microindentation were in good agreement with literature values and three-point bending results. It was shown that a conventional DMA is suitable to determine local and bulk mechanical viscoelastic material properties within one instrument.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 68, July 2018, Pages 359-364
Journal: Polymer Testing - Volume 68, July 2018, Pages 359-364
نویسندگان
Esther Ramakers-van Dorp, Thomas Haenel, Frank Sturm, Bernhard Möginger, Berenika Hausnerova,