کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7888717 | 1509796 | 2018 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation of glass-ceramics with diopside as the main crystalline phase from low and medium titanium-bearing blast furnace slag
ترجمه فارسی عنوان
آماده سازی سرامیک شیشه ای با دیوپسید به عنوان فاز اصلی بلوری از سرباره کوره انفجار کربن پایین و متوسط تیتانیوم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سرباره کوره انفجار تیتانیوم، سرامیک شیشه ای، عامل هسته ای کریستال، دیوپسید،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
Because of the low content of TiO2, the utilization of low and medium Ti-bearing blast furnace slag is a difficult problem. In this study, glass-ceramics with diopside as the main crystalline phase was made by using TiO2 in the blast furnace slag as the nucleating agent and adding additional elements of TiO2, Fe2O3 and Cr2O3. The effects of these three nucleating agents on the phase composition and structural properties of the prepared glass-ceramics were evaluated by DSC, XRD, and SEM to determine their optimal dosage. Research results show that the suitable mass percentages of the TiO2, Fe2O3 and Cr2O3 crystal nucleation agents of the glass-ceramics are 7.69%, 0.96%, and 2.88%, respectively. The prepared glass-ceramics have excellent physical and chemical properties, e.g., a bending strength of 114.74Â MPa, a bulk density of 2.77Â g/cm3, a water absorption rate of 0, and a mass-loss rate of only 0.085%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 44, Issue 2, 1 February 2018, Pages 1384-1393
Journal: Ceramics International - Volume 44, Issue 2, 1 February 2018, Pages 1384-1393
نویسندگان
Dongfeng He, Chong Gao, Jiangtao Pan, Anjun Xu,