Diffusion bonding of the oxide dispersion strengthened steel PM2000

Ferritic oxide dispersion strengthened (ODS) steels are well suited as structural materials, e.g. for claddings in fission reactors and for plasma facing components in fusion power plants due to their high mechanical and oxidation stability at high temperatures and their high irradiation resistance. PM2000 is an iron based ODS ferritic steel with homogeneously distributed nanometric yttria particles. Melting joining techniques are not suitable for such ODS materials because of the precipitation and agglomeration of the oxide particles and hence the loss of their strengthening effect. Solid state diffusion bonding is thus chosen to join PM2000 and is investigated in this work with a focus on oxide particles. The diffusion bonding process is aided by the computational modeling, including the influence of the ODS particles. For modeling the microstructure stability and the creep behavior of PM2000 at various, diffusion bonding relevant temperatures (50-80% Tm) are investigated. Particle distribution (TEM), strength (tensile test) and toughness (Charpy impact test) obtained at temperatures relevant for bonding serve as input for the prediction of optimal diffusion bonding parameters. The optimally bonded specimens show comparable strength and toughness relative to the base material.