کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7981573 | 1514747 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of grain size on the strength size dependence exhibited by sub-micron scale nickel structures with complex cross-sectional geometries
ترجمه فارسی عنوان
تأثیر اندازه دانه بر میزان وابستگی به قدرت نشان داده شده توسط مقادیر نیکل مقیاس زیر میکرون با هندسه پیچیده مقطعی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نانوکریستال، نیکل، پلاستیک قدرت تولید، اثرات اندازه،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
Sub-micron scale columnar nickel structures with different cross-sectional geometries and grain sizes were successfully fabricated via electron beam lithography and electroplating methods. Uniaxial microcompression tests revealed the flow stresses of these structures increase with smaller grain sizes, in close agreement with the Hall-Petch relationship. Size dependent softening effects were only observed in nickel pillars with average grain sizes in the range of 9.4-13.2Â nm. In contrast, pillars with grain size near ~22Â nm do not exhibit any flow stress dependence on size, with the pillar strengths remaining relatively constant. In addition, for nickel pillars with the same microstructures, there is no observable dependence of flow stresses on the cross-sectional geometries.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 596, 24 February 2014, Pages 275-284
Journal: Materials Science and Engineering: A - Volume 596, 24 February 2014, Pages 275-284
نویسندگان
Brandon B. Seo, Zeinab Jahed, Michael J. Burek, Ting Y. Tsui,