کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7990848 1516131 2018 27 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of the ageing conditions and the initial microstructure on the precipitation of α phase in Ti-17 alloy
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
Influence of the ageing conditions and the initial microstructure on the precipitation of α phase in Ti-17 alloy
چکیده انگلیسی
The precipitation of α phase during ageing was investigated in the near-β titanium alloy Ti-17 considering either a fully βmetastable initial microstructure or a 35% αprimary + 65% βmetastable initial microstructure. In-situ electrical resistivity and high energy X-ray diffraction measurements revealed the influence of the initial microstructure, with different α morphologies (size and distribution of αprimary), as well as the heating rate on the precipitation sequences and kinetics following the decomposition of the β-metastable phase. Various amounts of metastable phases (ωisothermal and α″isothermal) precipitate in temperature ranges that increase with the heating rate. From temperatures about 500 °C, the orthorhombic α″isothermal structure evolved towards the hexagonal close-packed α as temperature increased. SEM microstructure characterisations showed that slow heating rates promoted a fine and dense α precipitate distribution through the formation of ωisothermal and/or α″isothermal, leading to higher hardness values. A higher heating rate restricted the precipitation of α″isothermal and shifted to the one of α at a higher temperature, leading to coarser precipitates. Furthermore, precipitation kinetics of α″isothermal/α were quicker considering an initial intragranular α precipitation as compared to α colonies.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 763, 30 September 2018, Pages 446-458
نویسندگان
, , , , , ,