Crystal plasticity modeling of a near alpha titanium alloy under dynamic compression

The purpose of this study is to describe the dynamic behavior of near alpha titanium alloy at elevated temperatures using Crystal plasticity and other models. Three constitutive models: Johnson-Cook (J-C), Zerilli-Armstrong (Z-A), Cowper-Symonds (C-S) and J-C fracture models are established. Experimental results observed that material displayed strain rate sensitivity at various strain rates. The generated model constants have been incorporated into finite element code. Finite Element simulations of tensile tests under different strain rates have been performed using Autodyn software. A crystal plasticity model is established and shows that it can predict the stress strain response under dynamic loading conditions. The developed crystal plasticity model was implemented in the ABAQUS code to simulate high strain rate compression and showed good agreement. Subsequently, a Charpy impact test on specimen has also been simulated. The fracture surfaces of specimens tested under quasi static state at various temperatures were studied under scanning electron microscopy (SEM).