کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7992840 1516149 2018 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Crack initiation mechanism in lanthanum-doped titanium-zirconium-molybdenum alloy during sintering and rolling
ترجمه فارسی عنوان
مکانیسم آغاز خم شدن در آلیاژ تیتانیوم-زیرکونیوم-مولیبدن دوتایی لانتانیوم در زمان رساندن و نورد
کلمات کلیدی
آلیاژ تیتانیوم-زیرکونیوم-مولیبدنینگ لانتانیم مکانیسم ترک ذرات فاز ثانویه، ریز ساختار، شکستگی،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد فلزات و آلیاژها
چکیده انگلیسی
Lanthanum-doped titanium-zirconium-molybdenum (La-TZM) alloy was prepared by powder metallurgy and rolling process. The processing crack and crack initiation mechanisms of La-TZM alloy after sintering, hot rolling and cold rolling were studied by scanning and transmission electron microscopy. The results show that the doped La(NO3)3, TiH2 and ZrH2 have finer secondary phase in the La-TZM alloy plate. The fracture mode of sintering billet is inter-granular, but the fracture surface of hot rolling exhibited transgranular cleavage. However, the cold rolling is quasi-cleavage fracture. The secondary phase particles tend to hinder the movement of dislocations causing dislocations pile-up. The resulting tensile stress can accelerate cracks nucleation and growth, and the crack propagation will be deflected by the secondary phase particles. The crack initiation can be avoided by reducing local stress concentration caused by dislocations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 745, 15 May 2018, Pages 532-537
نویسندگان
, , , , , , , , , ,