کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7994042 | 1516156 | 2018 | 28 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium-silicon eutectic alloy
ترجمه فارسی عنوان
اثرات میکرو آلیاژ کردن یتیم بر ریزساختار و مقاومت سیم کربن کاربید سیلیکون با آلیاژ ائوتکتیو کروم-سیلیکون
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
With the purpose of increasing the joint strength by refining the grain size of CrSi2 and increasing the fraction of Si-CrSi2 eutectic, the authors studied the effect of yttrium (Y) on the microstructure and mechanical property of SiC joints brazed with Si-29â¯wt% Cr eutectic alloy with varying Y contents (0-1.0â¯wt% Y). It was found that adding of appropriate content of Y (<0.1â¯wt%) could refine the grain size of CrSi2 phase and increase the fraction of eutectic region. However, excess addition of 0.5 or 1.0â¯wt% Y caused the coarsening of CrSi2 phase with the formation of irregular shape Y-Si-rich silicide. The SiC joint brazed with alloy added with 0.1â¯wt% Y exhibited high shear strength, which was improved approximately 20% in comparison with that without Y. Both the fine size of CrSi2 phase and high fraction of Si-CrSi2 eutectic contributed to the high strength of SiC joint. Interface between the SiC and brazing alloy exhibited a good chemical adhesion without detectable interdiffusion or the formation of reaction phases.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 738, 25 March 2018, Pages 354-362
Journal: Journal of Alloys and Compounds - Volume 738, 25 March 2018, Pages 354-362
نویسندگان
H.X. Li, Z.Q. Wang, Z.H. Zhong, Q. Wen, K.J. Song, H.B. Zhang, Y.C. Wu,