کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8011797 | 1516928 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Constrained sintering and wear properties of Cu-WC composite coatings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Coatings of metal matrix composites (Cu-WC) were fabricated by solid-state sintering. WC reinforcing particles in different quantities from 5% up to 30% (volume fraction) were mixed with Cu particles. After mixing, the powders were poured onto the surface of copper substrates. Sintering was carried out at 1000 °C under a reducing atmosphere in a vertical dilatometer. Sintering kinetics was affected by both rigid substrates and WC particles which retarded the radial and axial densification of powders. However, the coatings were strongly attached to the substrate, and WC particles were randomly distributed within the matrix. The addition of the reinforcing particles enhanced the microhardness and reduced the volume loss in wear tests to 1/17 compared to the unreinforced sample. The predominant wear mechanism was identified as abrasion at a load of 5 N. 20% WC (volume fraction) reinforcing particles led to the maximum values of properties for the composite coating.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Transactions of Nonferrous Metals Society of China - Volume 27, Issue 10, October 2017, Pages 2214-2224
Journal: Transactions of Nonferrous Metals Society of China - Volume 27, Issue 10, October 2017, Pages 2214-2224
نویسندگان
J.L. Cabezas-Villa, L. Olmos, H.J. Vergara-Hernández, O. Jiménez, P. Garnica, D. Bouvard, M. Flores,