کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8023471 | 1517534 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface modification of austenitic stainless steel for corrosion resistance in high temperature supercritical-carbon dioxide environment
ترجمه فارسی عنوان
اصلاح سطح فولاد ضد زنگ آستنیتی برای مقاومت در برابر خوردگی در محیط با دمای بالا دمای دی اکسید کربن فوق بحرانی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تغییر سطح فولاد ضد زنگ آستنیتی، آلومینیوم نیکل، درمان حرارتی اینترفیس، دی اکسید کربن فوق بحرانی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
Surface-modification was applied to austenitic stainless steel 316LN in order to improve the corrosion resistance in high temperature supercritical-carbon dioxide (S-CO2) environment. The surface-modification methods consisted of deposition of either a single Al layer or a NiAl bi-layer on the surface, followed by inter-diffusion heat treatments. The former resulted in formation of a surface layer composed of a mixture of NiAl and ferrite phases, and the latter resulted in formation of a continuous NiAl surface layer. Surface-modified 316LN showed reduced weight gains than the as-received 316LN alloy after exposure to S-CO2 at 650â¯Â°C (20â¯MPa) for 500â¯h. Pre-oxidation in helium at 900â¯Â°C before S-CO2 exposure further improved corrosion resistance by forming inner α-Al2O3 layer. On the other hand, the extent of inter-diffusion zone was less for the specimen with a continuous NiAl surface layer before and after S-CO2 exposure.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 349, 15 September 2018, Pages 415-425
Journal: Surface and Coatings Technology - Volume 349, 15 September 2018, Pages 415-425
نویسندگان
Sung Hwan Kim, Gokul Obulan Subramanian, Chaewon Kim, Changheui Jang, Keun Man Park,