کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8025661 | 1517588 | 2016 | 26 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of thick, crack-free quasicrystalline Al-Cu-Fe coatings by electron-beam deposition
ترجمه فارسی عنوان
ساخت پوشش های آلومینیوم کریستالی آلومینیوم ضخیم و ضخیم با رسوب الکترون پرتو
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فناوری نانو (نانو تکنولوژی)
چکیده انگلیسی
The analysis of the residual stresses dependence on the deposition temperature has enabled the thermal expansion coefficient of the coating material to be determined at αc = (17.1 ± 1.3) â 10â 6 Kâ 1.The fracture toughness of the coating material in terms of the stress intensity factor has been estimated at K1C=1.68±0.11MPam. These characteristics of the Al-Cu-Fe coatings obtained have been used for the calculation of a critical thickness, below which the crack-free structure of the coatings is retained. The obtained values of the critical thickness were compared with the results of experimental study of surfaces of the Al-Cu-Fe coatings deposited onto different substrates at various temperatures. We observed that the channel cracking was inhibited if the coating was thinner than the corresponding critical thickness.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Surface and Coatings Technology - Volume 291, 15 April 2016, Pages 406-412
Journal: Surface and Coatings Technology - Volume 291, 15 April 2016, Pages 406-412
نویسندگان
S. Polishchuk, A. Ustinov, V. Telychko, A. Merstallinger, G. Mozdzen, T. Melnichenko,